ProGrit GmbH · Kastellstrasse 6 · 8623 Wetzikon · Tel: +41 (0)44 844 54 26 · info@progrit.ch

PRS Core Rod Clamping System

back
engin-parts

Technical Data

engin-parts

Pallets in various sizes can be clamped in the core rod chuck PRS CP28 and PRS CP28 P.

 

Through hole diameter of smallest punch clamping systems:

  • ProGrit RCS II 60
  • = 28,5 mm
  • EROWA PM 56/60
  • = 25 mm
  • System 3R° Macro° 90803.50 und 90804.41
  • = 23 mm (Draw bar 16 mm)
  • System 3R° Macro° 600.17 und 600.27
  • = 20 mm (Draw bar 10,2 mm)

Pallets are available in three different types:

- Centered clamping:

Pallet is centered in X and Y and clamped in Z and in angle C in the chuck.

(PRS P18, PRS P21, PRS P23, PRS P27, PRS P27ID)

- Floated clamping:

Pallet is only locked in the axial direction Z. Rotation around C and small movements in radial direction X and Y are possible. Pallets are labelled with a F behind the product name.

(PRS P18F, PRS P21F, PRS P23F, PRS P27F, PRS P27F ID)

- Positioned clamping:

Pallet is referenced clamped in the directions of X, Y, Z und C by a positioning system.

(PRS P28P, PRS P28P ID)

There are different pallet types and techniques for the fixing of the core rod to the pallet available:

Pallets are available in various sizes and types on request.

Technical modifications reserved.

For a number of products of ProGrit GmbH, patents have been granted or are pending.

Trademarks of other, unrelated companies

EROWA and ITS are registered trademarks of EROWA AG.
° 3R, 3Refix and MACRO are registered trademarks of System 3R International AB or its affiliates.

Copyright © ProGrit 2019

ProGrit GmbH
  • Kastellstrasse 6 · 8623 Wetzikon / Switzerland ·
  • Tel: +41 (0)44 844 54 26 ·
  • info@progrit.ch